Viw Magazine

Business Coach

  • Written by Paul Salmon, Professor of Human Factors, University of the Sunshine Coast
When cars, trucks, bikes and pedestrians come together at an intersection, design makes the difference between collisions and safety. pxhere

This is the sixth article in our series, Moving the Masses, about managing the flow of crowds of individuals, be they drivers or pedestrians, shoppers or commuters, birds or ants.


A major issue for road safety is collisions at intersections between vehicles and vulnerable road users such as cyclists, motorcyclists and pedestrians.

In such collisions, often the driver is momentarily unaware of either the vulnerable road user or of their planned path through the intersection. While many factors can cause this lack of “situation awareness”, the design of the intersection is critical. With numbers of vulnerable road users increasing, how intersections are designed requires urgent attention.

The status quo

If you look at the intersections in your local area, many appear to have been designed primarily with drivers and efficiency in mind. The designs show little consideration of the needs of vulnerable road users. Typically, we see high speed limits, no dedicated bicycle lanes through the intersection, no filtering lanes for motorcyclists, and short crossing times for pedestrians.

This can make it difficult for vulnerable road users to pass through safely. And critically, the lack of overt protection for these vulnerable users also reduces drivers’ expectation of encountering them. This can lead to something that we call a “looked-but-failed-to-see error”: drivers are not aware of vulnerable road users even though they may have looked at them (this phenomenon is explained here).

In response to these problems, we recently completed research using a series of on-road studies to understand:

  1. how different road users interact at intersections

  2. what they need to know to support safe interactions.

Our next step involved using a sociotechnical systems-based design process to create new intersection design concepts. A sociotechnical system is any system in which humans and technology interact for a purposeful reason. Our aim was to develop a series of new intersection designs that better support the “situation awareness requirements” of all users.

Understanding the diversity of users

The most important finding from our on-road studies was that different road users experience the same intersection situations differently. Critically, these differences can create conflicts.

For example, drivers tend to be concerned with what is ahead of them, and specifically the status of the traffic lights. In contrast, cyclists and motorcyclists are concerned with working out a safe path and then filtering safely through the traffic. Thus, drivers who are not expecting them are often not aware of them or of what they might do next.

A key implication of our findings was that intersections should be designed to cater for the diverse situation awareness needs of all road users. The environment should facilitate safe interactions by ensuring that all road users are aware of each other and understand each others’ likely behaviours.

Based on this, we set about designing a series of new intersections using a sociotechnical systems design approach. Among other things this approach aims to create systems that have adaptive capacity and can cope with a diverse set of end user needs.

To achieve this, it proposes several core values, including that:

  • humans should be treated as assets rather than unpredictable and error-prone
  • technology should be used as a tool to assist and not replace humans
  • design should consider the specific needs and preferences of different users.

Designs for better intersections

We used these values as part of a participatory process to create three intersection design concepts. The design brief was to replace one of the intersections from the on-road studies (see below).

Figure 1. Bird’s-eye view (above) and first-person view (below) of the intersection to be replaced with new design, Map data ©2012 Google. Author provided

When we evaluated the designs with drivers, cyclists, motorcyclists and pedestrians, two of the designs performed best against key criteria: alignment with sociotechnical systems values, attainment of key intersection functions (such as to minimise collisions, maximise efficiency, maximise compliance, optimise flexibility), and user preferences.

The first design is known as the “turning team” design. It works on the premise that different road users could work effectively as a team when proceeding through the intersection. To do this the design aims to make drivers explicitly aware of other forms of road user (to connect the team) and provides each with a clear and dedicated path through the intersection.

Like all good teams whose members function based on different roles, the design aims to clear cyclists from the intersection before allowing motorised traffic to enter. Other features include a pedestrian crossing path wide enough to accommodate cyclists who are not comfortable with using the road, motorcyclist filtering lanes, and phasing of traffic lights based on road user type and direction of travel.

CC BY-ND

The second design is the “circular” concept. It explicitly separates motorised and non-motorised traffic. A circular pathway around the intersection is provided for pedestrians and cyclists to use. This pathway links with cycle lanes running down the centre of the road, separated by a kerb from the roadway.

On the roadway, this design provides a separate bus lane and a motorcycle zone at the front of the intersection to encourage motorcyclists to filter to the front. Finally, the design incorporates signs warning motorists to be on the lookout for cyclists and for motorcyclists filtering through the traffic from behind.

CC BY-ND

The way forward for intersection design?

The road transport systems of the future will be markedly different to those of today. Intersections will become intelligent, with the capacity to “talk” with vehicles, and driverless vehicles will negotiate intersections for us.

This is a long way off, however. In the shorter term, intersections will likely comprise a complex mix of standard vehicles, driverless vehicles and partially automated vehicles, as well as cyclists, motorcyclists, pedestrians, and perhaps new forms of vulnerable road user. Without change, intersections will continue to kill and injure at an unacceptable rate.

Our research provides important messages for how the intersections of the future should be designed. Designers should equally consider the needs of all users, rather than considering drivers first and the rest afterwards. Critically, this should extend to driverless vehicles and automated systems. What, for example, are the situation awareness needs of a fully driverless vehicle when negotiating an intersection? How can intersection design support these needs as well as those of human users?

Designers should not fall into the trap of assuming that all road users require the same information when negotiating intersections. While separating them physically, the intersection of the future should aim to connect its users cognitively.


We would like to acknowledge our colleagues and collaborators who have contributed to this research, including Professor Mike Lenne, Associate Professor Guy Walker, Professor Neville Stanton, Dr Natassia Goode, Dr Nick Stevens and Dr Ashleigh Filtness.

You can find other articles in the series here.

Paul Salmon receives funding from the Australian Research Council.

Gemma Read receives funding from the Australian Research Council.

Authors: Paul Salmon, Professor of Human Factors, University of the Sunshine Coast

Read more http://theconversation.com/we-can-design-better-intersections-that-are-safer-for-all-users-92178

Important Instructions for Australians Living in Camper Trailers

Living in a camper trailer offers Australians a unique way to embrace adventure and freedom while exploring the vast and beautiful landsca...

Maintaining Your Mini Digger: Tips for Longevity and Performance

If you're a proud owner or operator of a mini digger in Australia, you understand the importance of keeping your equipment in top-notch co...

Transform Your Business To Success: The Role Of Branding Agencies In Melbourne

In the bustling city of Melbourne, where every corner tells a story of innovation and creativity, the importance of branding cannot be o...

Revealing The Timeless Appeal Of Ladies' Bodysuits

Fashion has always been a canvas for self-expression, a realm where innovation and tradition intertwine to create garments that not only a...

What Is Crude Oil, and Why Is It Important to Investors?

Crude oil is the lifeblood of the global economy. As an investor, understanding the ins and outs of this vital commodity can be crucial to...

A Sweet Tooth's Guide to the Best Cakes in Melbourne

Indulge your sweet tooth in Melbourne's finest cakes! Brunetti offers decadent chocolate delights like Ciambella Chocolate Teacakes. Mel...

Alan Williams' Impact on Chicago's Defense: Analyzing Key Changes and Improvements

When Alan Williams stepped onto the field as the defensive coordinator for Chicago, expectations were high. His reputation for crafting di...

Understanding the Different Types of Pickup Truck Car Covers

Picking the right truck cover starts with understanding the various types available on the market. Each type is designed to address specif...

Understanding Commercial Plumbing in Adelaide

Introduction In the bustling city of Adelaide, where businesses thrive across diverse sectors, the seamless operation of commercial facil...

Driving into the Future: The Evolution of the Automotive Market in Australia - Trends and Predictions

Examining “the evolution of the automotive market in Australia: trends and predictions” reveals a swift embrace of electric vehicles a...

Crocs: Defying Fashion Norms and Redefining Individuality

In the realm of contemporary footwear, a singular item has emerged as a polarizing yet undeniably iconic choice: the versatile rubber shoe...

Benefits of Network Monitoring Devices in Businesses

In an era where seamless connectivity underpins business operations, ensuring a robust and secure network is paramount for any enterprise...

Tips for Staying Socially Active as a Senior

Staying socially active as a senior can be a challenging task. It becomes particularly difficult as mobility decreases, and friends and fa...

The Benefits of Living in Nature

Have you ever dreamed of buying a mountain property for sale, living immersed in nature, and being surrounded by the beauty of trees and w...

Affordable and Chic: A Guide to Stylish Splashback Tiling on a Budget

When it comes to kitchen renovations, splashback tiling stands out as a game-changer. Not only does it serve a practical purpose by protec...

How to Choose the Perfect Trailer for Your Needs

Whether you're hauling equipment for work or embarking on a weekend adventure, selecting the right trailer is essential. With a myriad of ...

Is There a downside to Taking collagen peptides? Understanding the Side Effects for a Healthier You

Introduction  Lately, everyone seems to be talking about collagen peptides. They're a type of protein that comes from collagen, a key pa...

The Best Materials for Living Room Plantation Shutters: A Comparison

Plantation shutters are a timeless and elegant window treatment that adds both style and functionality to any living space. When it comes ...

Top 5 Home Renovations That Increase Property Value

Enhancing the value of your property is a common goal for homeowners, whether they plan to sell soon or simply want to boost their investm...

Discover the Elegance of Sheer Curtains in Melbourne: A Guide to Custom-Made Sheer Elegance

When it comes to enhancing the aesthetics and functionality of your living spaces, the right choice of window treatments can make all the ...

Tomorrow Business Growth